Starting An Application Using A Voice Command; Replaying, Erasing, Or Changing A Voice Command - Nokia 6260 User Manual

T o o l s
To add an application to the list
of applications in the Voice
commands main view, select
→
Options New
scroll to the application that you
want to add and press Select.
2. The text Press 'Start', then speak
after tone is displayed.
• Press Start to record a voice
command. The phone sounds
a starting tone and the note
Speak now is displayed.
3. Pronounce the voice command.
The phone stops recording after
approximately 5 seconds.
4. After recording, the phone plays
the recorded command and the
note Playing voice command
displayed. If you do not want to
save the recording, press Quit.
5. When the voice command has
been successfully saved, the note
Voice command saved
displayed and a beep sounds. A
symbol can be seen next to
the application.
Starting an application
using a voice command
1. In standby mode, press and hold
. A short tone is played and
the note Speak now
64
application,
is
is
is displayed.
Copyright © 2004 Nokia. All rights reserved.
2. When you are starting an
application by saying a voice
command, hold the phone a short
distance away from your mouth
and pronounce the voice
command clearly.
3. The phone plays the original
voice command and starts the
application. If the phone plays an
incorrect voice command, press
Retry.
Replaying, erasing, or
changing a voice command
To replay, erase, or change a voice
command, scroll to the item that has
a voice command (indicated by
select Options, and then either:
• Playback – Listen to the voice
command again.
• Delete – Erase the voice
command.
• Change – Record a new voice
command. Press
),
Start to record.