Call Waiting (Network Service) - Nokia iSkoot 6600 User Manual

Mute or Unmute, End active
Conference, Private, Drop
Swap is used to switch between the active call and the call on hold.
Transfer is used to connect an incoming call or a call on hold with an active call
and to disconnect yourself from both calls.
Send DTMF is used to send DTMF tone sequences, for example, passwords or bank
account numbers.
Note: You may not have all of these options. Contact your service provider
for more details.
• Key in the digits with
which is transmitted while the call is active. Press
*, p (inserts a pause of approximately two seconds before, or between DTMF
characters.), and w (if you use this character, the remaining sequence is not
sent until you press

Call waiting (network service)

If you have activated the Call waiting service, the network will notify you of a new
incoming call while you have a call in progress.
1. During a call, press
To switch between the two calls, press Swap.
2. To end the active call, press .
Copyright
call, End all calls, Hold
participant, Answer, and Reject.
- . Each keystroke generates a DTMF tone,
Send again during the call). Press
to answer the waiting call. The first call is put on hold.
©
2004 Nokia. All rights reserved.
or Unhold, New call,
repeatedly to produce:
to produce #.
29