Electrical Requirements - Haier HWE15XCR-L User & Care Manual

ELECTRICAL REQUIREMENTS cont.
TO TEST YOUR POWER SUPPLY CORD:
1. Plug power supply cord into a mating, grounded 3 prong outlet.
(See Fig.4)
for operation.
NOTE:
The RESET button must be pushed in completely for proper operation. (See Fig.5)
The power supply cord must be replaced if it fails to trip when the test
button is pressed or fails to reset.
DO NOT turn the air conditioner on or off by unplugging the power
supply cord from the outlet. Always turn the air conditioner on or off at
the control panel or by using the remote control.
A damaged power supply cord must be replaced with a new power
supply cord obtained from the product manufacturer and installed my
a qualified service professional. It cannot be purchased at a retail store
and must not be repaired by the user.
If the power supply cord is damaged please call Haier Customer Service:
1-877-337-3639.
The power supply cord contains no user-serviceable parts.
PAGE 10 INSTALLATION REQUIREMENTS
Fig. 4
Fig. 5