Haier HWE15XCR-L User & Care Manual page 11

ELECTRICAL REQUIREMENTS cont.
Electrical shock hazard
Plug into a mating, grounded 3 prong
outlet.
Do not remove the ground prong from the
power supply cord.
IMPORTANT: Observe all governing codes and ordinances. Check the location where the air
conditioner will be installed. Make sure you have everything necessary for correct
installation.
THE LOCATION SHOULD PROVIDE:
rounded electrical outlet within 6 ft. (183 cm) of where the power supply cord exits the air
conditioner, for models: HWE15XCR-L, HWE18VCR-L, HWE24VCR-L
NOTE: Do not use an extension cord, plug adapter, surge protector or multi-outlet adapter.
ree movement of air in the room to be cooled.
rge enough opening for the air conditioner.
The air conditioner must not be installed in a through-the-wall sleeve. It can only be installed in a
double-hung window or in a wall. .
NOTE: The outside cabinet louvers must not be obstructed by bushes, trees
to pass freely through the cabinet louvers.
WARNING
INSTALLATION REQUIREMENTS
Do not use a plug adapter, extension cord,
surge protector, or multi-outlet adapter
Failure to follow these instructions can
result in injury, re, or electrical shock.
PAGE 9