Fax Redial; Storing Numbers; Storing A Pause - Brother MFC-9120CN User Manual

Note
• If you do not enter a letter and press OK in
step b, all registered names will appear.
Press a or b to scroll until you find the
name you are looking for.
• If the LCD shows No Contact Found
when you enter the first few letters of the
name, it means that a name for the letter
is not stored.

Fax redial

If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.
If you are sending a fax manually and the line
is busy, press Redial/Pause, wait for the
other fax machine to answer, and then press
Mono Start or Color Start to try again. If you
want to make a second call to the last number
dialled, you can save time by pressing
Redial/Pause and Mono Start or
Color Start.
Redial/Pause only works if you dialled from
the control panel.
Dialling and storing numbers

Storing numbers

You can set up your machine to do the
following types of easy dialling: One Touch,
Speed Dial and Groups for Broadcasting
faxes. You can also specify the default
resolution for each One Touch and Speed
Dial number. When you dial a quick dial
number, the LCD shows the name, if you
stored it, or the number. A scan profile can
also be stored along with the fax number.
If you lose electrical power, the quick dial
8
numbers stored in the memory will not be lost
because they are stored permanently.
A scan profile is the resolution and other scan
settings that you choose when you store a
number. For example, you will be asked to
select Standard, Fine, or Photo if you have
selected the Fax/Tel or I-FAX option. Or, you
will be asked to select B&W 200 dpi, B&W
200 × 100 dpi, Gray 100 dpi, Gray 200 dpi,
Gray 300 dpi, Color 100 dpi, Color 200 dpi,
Color 300 dpi or Color 600 dpi if you selected
the E-Mail option. (I-FAX, Fax/Tel and E-mail
options are available as a download.)

Storing a pause

Press Redial/Pause to insert a 3.5-second
pause between numbers. You can press
Redial/Pause as many times as needed to
increase the length of the pause.
8
8
8
57