Philips at751 User Manual page 26

EnGlIsh
,
Cleaning and maintenance
Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol
or acetone to clean the appliance.
-
-
-
-
Note: Water may leak from the socket at the bottom
of the shaver when you rinse it. This is normal and not
dangerous because all electronics are enclosed in a
sealed power unit inside the shaver.
Cleaning the shaving unit under the tap
1 Push the trimmer slide downwards to open
the trimmer.
2 Press the on/off button once to switch on the
shaver.
You can now start trimming.
3 After trimming, press the on/off button once to
switch off the shaver.
4 Clean the trimmer (see chapter 'Cleaning and
maintenance').
5 Close the trimmer ('click').
Clean the shaver after every shave for optimal
shaving performance.
Regular cleaning guarantees better shaving
performance.
For the best cleaning results, we advise you to use
the Philips Cleaning spray (HQ110).
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
1 Switch off the shaver.
25