Panasonic BB-HCS301A Troubleshooting Manual page 16

Troubleshooting
Problem
Audio is not
output from the
audio output
terminal.
16
• The Talk button appears like this:
Click the Talk button. (It will change to
• The Talk button is gray.
[Talk] is not permitted on the General User page. Permit it.
(See page 78 of Operating Instructions on the Setup CD-
ROM)
• Microphone is not selected on your PC's volume control screen.
Click [Options]
the Volume Control window. In the "Show the following
volume controls" column, check [Microphone], and click
[OK]. Check [Select] on the Recording Control window.
• The PC's microphone input setting is set to mute.
Open the PC's Volume Control window, check the
microphone checkbox and then adjust the volume controls.
• An audio output device is not connected to this product.
The audio output terminal of this product is a line output.
Connect it to an external speaker with a built-in amplifier (see
page 26 of Operating Instructions on the Setup CD-ROM).
• Audio can only be received for short periods of time.
Change the settings to extend the PC Audio Input Timeout.
(See page 69 of Operating Instructions on the Setup CD-
ROM)
• The audio output device's volume settings are set to minimum.
Adjust the volume settings to an appropriate volume.
• The access to this product is going through a proxy server.
The audio feature cannot be used when going through a
proxy server.
Cause and Remedy
[Properties] , and check [Recording] on
.)