Table of Contents
Advertisement
note
When using a browser to
access the projector, you
cannot connect through a
proxy server.
Standby Mode in the
Extended menu should be
set to
Communication On
to monitor the projector in
standby mode.
Using the Projector on a Network
60
Using a Browser to Control the Projector
You can use a standard web browser to monitor and control the
projector through the network.
1. Make sure that the projector is set up for your network, as
described on page 54.
2. Open your web browser and enter the IP address of the projector
you want to monitor in the browser window.
If you're not sure what the address of the projector is, turn the
projector on and select
display the IP address of the projector. Do not enter leading
zeroes.
3. Press
, or, if you set a Web control password in the
Enter
projector's Network menu, enter the user name
and your password, then press
4. Select one of the menu options listed on the screen, then change
any of the settings as needed. These settings correspond to those
found in the projector's menu system.
You cannot change the following settings using a web browser:
■
Quick Corner
in the Settings menu
Button
,
■
User's Logo
,
Termination
the Extended menu
Any settings in the Reset menu
■
Any settings related to the
■
Logo Protect
You can only change the following settings using a web browser:
■
Community Name
■
Monitor password
from the Network menu to
Wired LAN
.
Enter
,
Pointer Shape, Test Pattern,
,
High Altitude Mode
Remote Control Type
Power On Protect
, or
Network Protect
EPSONWEB
or
User
BNC Sync
, and
in
Language
,
User's
passwords
Advertisement
Table of Contents
