Connecting A Composite Video Source - Epson PowerLite Pro G5900 User Manual

Connecting a Composite Video Source

1. If your video cable has an RCA connector, connect it to the
yellow video output connector on your player and the yellow
connector on the projector (as shown below). Or if your
Video2
cable has a bayonet connector (BNC), connect it to the
connector on the projector.
2. If you want to play sound through the projector, see page 27 for
instructions on connecting audio cables.
3. When you've finished making any connections, see page 30 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If the video cable was not
Video1
provided with your video
device, you can purchase one
from an electronics dealer.
Setting Up the Projector
21