Table of Contents
Advertisement
Using the Projector on a Network
54
Connecting to a Wired Network
With an Ethernet cable, you can connect the projector to your
network and configure it with an IP address.
1. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT network cable. Connect
the cable to the
LAN
proper data transmission, use a shielded, Category-5 cable
or better.
2. Connect the other end to your Ethernet hub or router.
3. Turn on the projector.
4. Press the
button, select the
Menu
press
.
Enter
port on the projector as shown. To ensure
Network
menu, then
Advertisement
Table of Contents
