Table of Contents
Advertisement
Replacing the Lamp
The life span of the projection lamp is about 2000 hours if
in the Settings menu is set to
Consumption
3000 hours if
Power Consumption
check the lamp usage.
It is time to replace the lamp when:
■
The projected image gets darker or starts to deteriorate.
The message
■
Replace the lamp
lamp comes on.
The
light flashes orange.
■
Lamp
To maintain projector brightness and image quality, replace the lamp
as soon as possible.
You may also need to replace the lamp if the
red. See page 97.
Lamp light
To find the nearest reseller , visit www.latin.epson.com (website
available only in Spanish) or www.suporte-epson.com.br (website
available only in Portuguese), or contact your nearest Epson sales
office as described in "Where To Get Help" on page 110. Request
part number V13H010L63.
Power
(default), and
Normal
is set to
. See page 92 to
ECO
appears on the screen when the
light flashes
Lamp
note
Turn off this product when
not in use to prolong the life
of the projector.
Do not turn the projector on
immediately after turning it
off. Turning the projector on
and off frequently may
shorten the life of the lamp.
note
Epson recommends that you
clean the air filter whenever
you replace the lamp.
Maintaining the Projector
89
Advertisement
Table of Contents
