Table of Contents
Advertisement
note
You can set the projector to
automatically turn off the
lamp and enter "sleep mode"
when it has not received any
signals for 1 to 30 minutes
(see page 78 to enable,
disable, or adjust this
setting). This conserves
electricity, cools the
projector, and extends the
life of the lamp. If you want
to start projecting again,
press the
power button. If
P
you are done using the
projector, unplug the power
cord.
Setting Up the Projector
30
Turning the Projector On and Off
Turn on any connected computer or video equipment before starting
the projector so it can automatically detect and display the image
source. If you turn on the projector first, or have multiple pieces of
connected equipment, you may have to select the image source
manually (see page 34).
Follow these steps to turn on the projector:
1. Remove the lens cover.
2. Plug one end of the power cord into the projector, and the other
end into an electrical outlet.
Advertisement
Table of Contents
