Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the stand.
2
Remove the
3
Remove the
Procedure
1
Disconnect the speaker cable from the system board.
2
Note the routing of the speaker cable and the position of the rubber
grommets on the computer bezel.
3
Remove the speaker cable from the routing guides.
4
Remove the screw that secures the tape to the display-assembly base.
5
Peel off the tape that secures the speaker cable to the display-assembly
base.
68
computer. After working inside your
back
cover.
system-board
shield.
After working inside your