Removing The Rubber Feet; Prerequisites; Procedure - Dell Inspiron 22 3000 Series Service Manual

Removing the rubber feet

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the stand.
2 Remove the
3 Remove the
4 Follow the procedure from step 1 to step 4 in
5 Remove the
6 Remove the
7 Remove the
8 Remove the
9 Remove the fan.
10 Remove the
11 Remove the speakers.
12 Remove the
13 Follow the procedure from step 1 to step 7 in
assembly.

Procedure

1 Remove the screws that secure the rubber feet to the display bezel.
computer. After working inside your
back cover.
optical drive.
system-board shield.
memory module.
wireless card.
control-buttons board.
heat sink.
system board.
After working inside your
"Removing the hard
Removing the display
drive".
85