Printing On Non-Standard Paper Sizes - Canon iPF8400S User Manual

iPF8400S
2
Access the Main pane.
3
A
In the Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
4
Make your selection in the
5
Make your selection in the
6
Access the Page Setup pane.
7
Select and click a roll paper in the
8
Select the paper width of the roll loaded in the printer for
selected.
9
C
In Page Size, make sure 100*500 is displayed, as registered in Page Setup.
10
D
Select the Enlarged/Reduced Printing check box.
11
F
Click Fit Roll Paper Width.
12
Confirm the print settings, and click
• For tips on confirming print settings, see "Confirming Print Settings ."
Note

Printing on Non-Standard Paper Sizes

Printing on Non-Standard Paper Sizes
For printing on non-standard size paper, first register the paper size in the printer driver.
Once you register a paper size, you then can select it repeatedly from the paper size list. The paper size can be set
up to 18.0 m.
User's Guide
E
Print Target list.
F
Print Quality list.
A
Paper Source list.
M
Print to start printing.
Printing on Non-Standard Paper Sizes
B
Roll Width. In this case, 16 in. (406.4mm) is
P.321
➔
99