Canon iPF8400S User Manual page 594

Menu Settings
*1: A rough estimate of the amount of ink consumed per print job is displayed. Actual ink consumption may be different. The average
margin of error for estimates calculated according to Canon measurement conditions for ink costs is ±15%. Canon does not guar-
antee the accuracy of these estimates. Estimates may vary depending on conditions of use. Calculation of these estimates does
not include ink consumed when cleaning printheads by forceful ejection of ink.
Set./Adj. Menu
Limited items are displayed during printing. The displayed items are indicated by annotations.
Test Nozzle Check
Print
Status Print
Interface Print
Paper Details
Print Job Log
Menu Map
Adjust Head
Printer Posi.
Adj.
Feed
Priority
594
Setting Item
Standard
Simple
Other Initial adjustmt
Manual
Adj. Pri- Automatic
ority
Print Quality
Print Length
Adj. Auto(GenuinePpr)
Quality
Auto(OtherPaper)
Description, Instructions
Print a test pattern to check the nozzles.
Print information about the setting values and condition of the
printer.
Print interface settings information.
Print the paper settings as specified in Paper Details.
Print a record of print jobs, including the paper type and size,
amount of ink consumed, and so on. Ink consumption indi-
cates a rough estimate of the amount of ink consumed per
print job.( *1 )
Print the menu structure.
An adjustment pattern is printed and the print position is au-
tomatically adjusted to fix misaligned printing. Select Stand-
ard if vertical lines in printed material are warped or colors
are out of alignment. Select Standard also if the printing re-
sults are not improved by executing Simple. (See "Automatic
Adjustment to Straighten Lines and Colors.")
An adjustment pattern is printed and the print position is au-
tomatically adjusted to fix misaligned printing. Simple exe-
cutes a simple adjustment in a short time. Select Simple
when frequently adjusting the printhead, such as during daily
maintenance. (See "Automatic Adjustment to Straighten Lines
and Colors.")
P.712
➔
Printhead position adjustment is executed during the initial
setup. If adjusting the printhead position has not been per-
formed such as due to an error during initial setup or the
state of the operating settings when replacing the printhead,
select Initial adjustmt. (See "Adjustment When Installing the
Printhead.")
P.715
➔
Input the setting values from the adjustment pattern printing
results and adjust the printing position to fix misaligned print-
ing. Normally, select Standard. However, when printing on
special paper, or if printing is not improved after Standard,
try Manual. (See "Manual Adjustment to Straighten Lines and
Colors.")
P.714
➔
Specify exact paper feeding, if desired. Normally, select Au-
tomatic. Choose Print Quality for attractive printing. Choos-
ing Print Quality also makes banding less noticeable.
Choose Print Length if you prefer to feed the paper an exact
amount.
Specify this mode with paper identified in the Paper Refer-
ence Guide. (See "Displaying the Paper Reference
Guide.")
P.462
➔
The printer prints and reads a test pattern for automatic ad-
justment of the feed amount. (See "Automatic Banding Ad-
justment.")
P.719
➔
Specify this mode with paper not in the Paper Reference
Guide. (See "Displaying the Paper Reference
Guide.")
P.462
➔
iPF8400S
P.712
➔
User's Guide