Removing The Fan; Replacing The Fan - Dell Vostro 1710 Service Manual

Back to Contents Page
Fan
Dell™ Vostro™ 1710
Service Manual

Removing the Fan

Replacing the Fan

Removing the Fan
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your
computer.
1. Follow the instructions in
2. Loosen the eight screws that secure the memory cover. (See
memory cover.)
3. Remove the memory cover and set it aside.
4. Remove the two M2.0 x 3-mm screws that secure the fan to the base of the computer.
5. Disconnect the fan connector from the system board connector, and remove the fan.
1 fan 2 M2.0 x 3-mm screws (2)
3 fan connector
Replacing the Fan
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your
computer.
This procedure assumes that you have completed the removal procedure
Before Working on Your Computer.
Removing a Memory Module
Removing the
for an illustration of the
Fan.