HP EliteBook 8560p Maintenance And Service Manual page 120

Description
For use in HP EliteBook 8560p models
Included in Display Panel Support Kit, for use in HP ProBook 8560p models
Display Panel Support Kit (includes WLAN antennas, WWAN antennas, and display enclosure)
For use in HP ProBook 6560b models
For use in HP EliteBook 8560p models
For a list of display spare parts, see
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Bottom door (see
b. Hard drive (see
c. Optical drive (see
d. WLAN module (see
e. WWAN module (see
f. Fan (see
g. Heat sink (see
h. Modem module (see
i. Keyboard (see
j. Bottom cover (see
k. System board (see
Remove the display assembly:
1. Position the computer right-side up with the front toward you.
2. Open the computer as far as possible.
3. Remove the four Phillips PM2.5×4.5 screws (1) that secure the display to the computer.
112 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Display components on page
Battery on page
Bottom door on page
Hard drive on page
Optical drive on page
WLAN module on page
WWAN module on page
Fan on page 85)
Heat sink on page
Modem module on page
Keyboard on page
Bottom cover on page
System board on page
34.
58).
64).
69)
65)
76)
74)
86)
83)
92)
94)
106)
Spare part number
641201-001
657829-001
657831-001
657829-001