Regulatory Compliance Notices; Regulatory Compliance Identification Numbers; Federal Communications Commission Notice - HP ProLiant DL580 Setup And Installation Manual

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, the HP
ProLiant DL580 Generation 2 server is assigned a series number. The series number
can be found on the product label, along with the required approval markings and
information. When requesting certification information for this product, always refer
to this series number. This series number should not be confused with the marketing
name or model number for the ProLiant DL580 Generation 2 server.

Federal Communications Commission Notice

Part 15 of the Federal Communications Commission (FCC) Rules and Regulations
has established Radio Frequency (RF) emission limits to provide an interference-free
radio frequency spectrum. Many electronic devices, including computers, generate
RF energy incidental to their intended function and are, therefore, covered by these
rules. These rules place computers and related peripheral devices into two classes, A
and B, depending upon their intended installation. Class A devices are those that may
reasonably be expected to be installed in a business or commercial environment.
Class B devices, including personal computers, are those that may reasonably be
expected to be installed in a residential environment. The FCC requires devices in
both classes to bear a label indicating the interference potential of the device as well
as additional operating instructions for the user.
The rating label on the device shows which class (A or B) the equipment falls into.
Class B devices have an FCC logo or FCC ID on the label. Class A devices do not
have an FCC logo or FCC ID on the label. Once the class of the device is determined,
see the following corresponding statement.
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide

Regulatory Compliance Notices

A
A-1