Cleaning And Maintenance; Cleaning The Air Filter; Cleaning The Surfaces; Maintaining The Gas Nailer - DeWalt DDF5110500 Manual

English
5

Cleaning and Maintenance

WARNING
Serious injuries due to accidental
triggering
Î
Remove the battery.
Î
Remove the gas cartridge.
Î
Remove the nail strip from the
magazine, see chapter 4.2
"Removing the Nail Strip".
Î
Do not press the barrel of the Gas
Nailer against any surfaces.
Î
Keep your ¿ nger away from the
trigger.
CAUTION
Hot surfaces
Î
Let the Gas Nailer cool down prior to
cleaning.
NOTICE Malfunctions: Do not oil device
components or lubricate them with grease.

5.1 Cleaning the Air Filter

Î
Loosen the screw on the cover/lid (1).
Î
Remove the cover/lid (2).
Î
Clean the air ¿ lter in the cover using
compressed air.
1
2
46

5.2 Cleaning the Surfaces

NOTICE Damage to surfaces: Do not use any
thinners, solvents, gasoline, etc. for cleaning
purposes.
– Only clean the Gas Nailer using dry cloths.
– Only clean the tool box with dry cloths and
compressed air.

5.3 Maintaining the Gas Nailer

The Gas Nailer may only be maintained and
repaired by an authorized specialist workshop. If
a maintenance or service measure is required,
the LED on the handgrip will start to À ash, see
chapter 2.4 „LED Device Indicator".