Programming Quantity For Cappuccino/Latte Macchiato/Warm Milk Froth; 設定卡布奇諾/拿鐵瑪奇朵/溫牛奶奶泡量 - Nespresso LattissimaTouch Manual

PROGRAMMING qUANtIty FOR CAPPUCCINO/LAttE MACCHIAtO/WARM MILK FROtH/

設定卡布奇諾/拿鐵瑪奇朵/溫牛奶奶泡量
infORmATiOn: follow the steps 1-8 of section «Preparing Cappuccino and Latte Macchiato».
訊息:
請參閱"調製卡布奇諾和拿鐵瑪奇朵"章節地1-8個步驟。
3 sec.
1. touch and hold Cappuccino/ Latte Macchiato/ Warm milk froth
button for at least 3 sec. Milk frothing starts. Button blinks fast:
programming mode.
1.
長按特濃、 濃縮、 大杯咖啡鍵至少三秒， 然
後進入預設模式。 開始沖調， 按鈕燈快速閃
動:預設模式。
nOTe: please refer to «Factory settings» section for
min/max programmable quantities.
注意:
注意:請參閱原廠設定章節來設定最
少/最多預設量的設定。
2. Release button when desired milk froth volume is reached.
Button still blinks fast: programming mode. (Cappuccino/Latte
Macchiato). When programming the Warm milk froth beverage,
the programming ends here.
2.
按住按鈕， 直到達希望的水位才放開按鈕。
按鈕繼續快速閃動: 預設模式。 (卡布奇諾/拿
鐵瑪奇朵)。 當預設溫奶泡飲品， 預設在此完
成。
3 sec.
3. touch and hold the same button. Brewing starts. Release
button when desired coffee volume is reached. Recipe volume
is now stored for the next preparations. Button blinks 3 times to
confirm the new water volume.
3.
長按同一按鈕。 開始沖調。 按住按鈕， 直到
達希望的水位才放開按鈕。 現已儲存食譜份
量， 為調製下一杯咖啡做準備。 按鈕燈閃動3
次來確定新食譜份量。
nOTe: the milk froth volume depends on the kind of
milk that is used, its temperature and the position of the
milk regulator knob.
注意: 牛奶泡沫的份量視使用的牛奶種類
及其溫度而定。
EN
TW
19