Download Print this page

調製咖啡; Assembling/Disassembling Of Rapid Cappuccino System (R.c.s.); 裝置/拆除 '快速卡布奇諾系統(R.c.s.); Coffee Preparation - Nespresso LattissimaTouch Manual

Hide thumbs Also See for LattissimaTouch:

Advertisement

Available languages

Available languages

COFFEE PREPARAtION/

EN
nOTe: during heat up, you can press any coffee buttons. The coffee will then flow automatically when the machine is ready.
TW
提示:
在加熱過程中, 您可以按下任何咖啡按鍵。 咖啡機準備好後, 咖啡會自動流出。
1. Lift the lever completely and insert the
capsule.
1.
完全提起拉桿, 並放入Nespresso
咖啡膠囊。

ASSEMBLING/DISASSEMBLING OF RAPID CAPPUCCINO SyStEM (R.C.S.)/

裝置/拆除 '快速卡布奇諾系統 (R.C.S.)
1. Remove the milk container lid and unplug
milk aspiration tube.
1.
移除牛改容器上蓋, 並拔出牛
奶吸管。
14
調製咖啡
2. Close the lever and place a cup under the
coffee outlet.
2.
合上拉桿, 並在咖啡出口放
置杯子。
2. Remove the milk froth regulator knob by
turning it until
and pulling it up.
2.
將牛奶泡沫調節旋鈕扭至標
記位置
, 並將其拉出。
110 ml
40 ml
25 ml
3. Press the Ristretto (25 ml), the Espresso (40 ml) or the Lungo (110 ml)
button. Preparation will stop automatically. to stop the coffee flow or top
up your coffee, press again.
3.
按下特濃咖啡按鈕(25毫升)或濃縮咖啡按鈕(40毫
升)或大杯咖啡按鈕(110毫升)。 調製咖啡會自動停
止。 再次按鈕, 即可使其停止或加滿咖啡。
3. Remove Rapid Cappuccino System connector by
unlocking it from to
and pulling it off.
3.
將快速卡布奇諾系統連接器標記扭
向另一方標記
, 並將其拉出。
4. take the cup. Lift and close the lever
to eject the capsule into the used capsule
container.
4.
先取出咖啡杯。 提起及合上
拉桿, 以取出膠囊至膠囊回收
盒。
4. Remove the milk spout by pulling it off.
4.
將牛奶噴嘴拉出。

Advertisement

loading

This manual is also suitable for:

Lattissima touch facelift