EP1285
ORDER NO.0808U08C1
5.9. Removing the Sub PCB
1. Execute all the procedures of 5.1. Removing the
Headrest, Back cushion, and Armrests.
2. Unscrew four Screws (two each at right/left) and remove
the Under box top.
3. Unscrew two Screws, and remove the Under box top
right and the Under box top left, then you can pull out the
Under box about half.
4. Disconnect Hoses at both sides.
5. Unscrew Screws, cut Cable ties, remove Ground wires, and
disconnect Connectors.
- 30 -