Table of Contents
Advertisement
Rotisserie Oven
Stacking Ovens
A DRGV-14 two cavity oven is shipped from the factory as two individual ovens along with the
components required to assemble them into a single unit. The lower oven will have casters installed, the
upper oven will not.
Prepare the top oven by attaching the mounting angle to the bottom as illustrated below.
Prepare the lower oven by first removing the two side panels. Then attach the stacking channels, flue
duct and baffle as detailed in the following illustrations.
Serious injury, equipment damage or death could result if attempting to install
these ovens yourself. Special equipment is required to lift and stack two ovens.
Ensure that an authorized BKI service agent installs the oven.
22
Installation
Advertisement
Table of Contents
