Operations using the front panel top controls
What has been registered in the STATUS 1 to 3 buttons b and PROG MENU 1 to 4 buttons
c located at the bottom of the panel can be called to the VTR status display area 3 by
pressing the button concerned.
The called item can be operated using the buttons shown below.
1-1 VTR status displays
When the power is turned on, the information registered in the STATUS 1 button appears on
the display, and after this point what is displayed can be switched by pressing the STATUS 1
to 3 buttons b.
[Example of status display]
Each item consists of 6 characters. Three items can be displayed at the same time.
≥
The names of the items appear on the first line, and their statuses on the second line.
When the number of registered items is 4 or more, press the SCROLL buttons 5 to scroll
≥
the display to the left or right.
When the number of registered items is less than 3, "....." appears in the sections where
≥
items have not been registered.
2-1 Registered menu item displays
The registered setup menu items are displayed by pressing the PROG MENU 1 to 4 buttons
c.
[Example of registered menu item display]
Digit 1:
Digits 2 to 13:
Digit 14:
Digits 15 to 20: Setting (6-character display)
Two registered menu items can be displayed at the same time.
≥
When the number of registered items is 3 or more, press the SCROLL buttons 5 to scroll
≥
the display up or down.
The data in the currently selected user file (USER1 to USER5) is reflected in the settings.
≥
CH CONDITION
R
E
C
F
R
M
R
l
0
8
0
i
I
¢ P
_
R
O
L
L
L
O
C
A
L
E
Cursor (¢) for selecting items/mark (!) indicating that a setting is being
changed
Name of the menu item (12-character display)
Cursor for selecting item
– 21 –
ENTER
ESCAPE
SHIFT
5
6
7
8
E
F
O
U
T
.
.
N
T
5
9
.
.
T
I
M E
N
A
S T &
.
.
.
.
.
.
.
.
5
s
E
J