Panasonic AJ-HD150P Operating Instructions Manual page 96

Setup menus
USER menu
<AUDIO>
No.
748
749
750
751
752
753
754
755
756
757
758
759
760
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
AUDIO PB 0000
VR 0001
ANA CH1 0000
SEL 0001
ANA CH2 0000
SEL 0001
ANA CH3 0000
SEL 0001
ANA CH4 0000
SEL 0001
SD SDI CH1 0000
SEL 0001
SD SDI CH2 0000
SEL 0001
SD SDI CH3 0000
SEL 0001
SD SDI CH4 0000
SEL 0001
JOG PROC 0000
0001
DV PB ATT 0000
0001
REC PT 0000
MUTE 0001
AUD VR 0000
CTRL 0001
0002
– 96 –
DIS This selects whether the playback level controls are to work in
ENA
the EE mode when INT SG has been selected as the setup
menu item No.700 (AUDIO IN SEL) setting.
0: The INT SG output level is fixed at UNITY.
1: The INT SG output level can be varied using the playback
level controls.
<Notes>
• When 0 (DIS) is selected in setup menu No.760 (AUDIO
VRCONT), the output level of INT SG is fixed at UNITY
irrespective of the present setting.
• When 2 (MUTE) is selected in setup menu No.760 (AUDIO
VRCONT), the output level of INT SG is muted irrespective
of the present setting.
CH1 This selects the signals to be output to analog output CH1.
CH5
0: The CH1 signals are output.
1: The CH5 signals are output .
CH2
This selects the signals to be output to analog output CH2.
CH6
0: The CH2 signals are output.
1: The CH6 signals are output .
CH3 This selects the signals to be output to analog output CH3.
CH7 0: The CH3 signals are output.
1: The CH7 signals are output .
CH4
This selects the signals to be output to analog output CH4.
CH8
0: The CH4 signals are output.
1: The CH8 signals are output .
CH1
This selects the signals to be output to SDI output CH1.
CH5
0: The CH1 signals are output.
1: The CH5 signals are output .
CH2 This selects the signals to be output to SDI output CH2.
CH6 0: The CH2 signals are output.
1: The CH6 signals are output .
CH3
This selects the signals to be output to SDI output CH3.
CH7
0: The CH3 signals are output.
1: The CH7 signals are output .
CH4
This selects the signals to be output to SDI output CH4.
CH8 0: The CH4 signals are output.
1: The CH8 signals are output .
OFF This selects the slow signal processing for the digital audio
ON output in the JOG, VAR or SHTL mode.
0: Sound which has not been subjected to the digital audio
slow signal processing is output even in the STILL mode.
1: Sound which has been subjected to the digital audio slow
signal processing is output.
This selects the audio output level during DV format playback.
OFF
ON 0: The audio output level is not attenuated.
1: The audio output level is attenuated.
OFF This selects whether to mute the audio signals at the joins
ON between recordings during DV or DVCAM format playback.
0: The audio signals are not muted.
1: The audio signals are muted.
DIS This selects whether the adjusting volume for CH5~CH8 input/
output level (ANALOG, AES/EBU, SDI) functions.
ENA
MUTE 0: Input/output level is fixed at UNITY.
1: Input/output level can be changed by the adjusting volume.
2: Input/output level is muted.
Description