Panasonic AJ-HD150P Operating Instructions Manual page 67

Setup menus
SYSTEM menu
<SYSTEM>
No.
12
13
14
15
16
17
18
19
The underline on the setting item denotes the initial setting.
1
* : With the HD output (HD tape playback or up-conversion output)
2
* : With the SD output (SD tape playback or down-conversion output)
(continued)
Item Setting
Superimposed Superimposed
No.
display display
SYS H 0550
(HD)*1 :
1100
:
1650
V PHASE 0000
(HD)*1 :
0500
:
1000
SYS SC 0000
:
2
(SD)*
0108
:
0216
VO SYS 0000
2
H (SD)* :
0429
:
0858
SDI SYS 0000
:
2
H (SD)*
0429
:
0858
V PHASE 0000
:
2
(SD)*
0190
:
0380
SCH COAR 0000
2
(SD)* 0001
0002
0003
SCH FINE 0000
:
2
(SD)*
0032
:
0064
– 67 –
Description
–550 This enables the system phase to be adjusted in 27ns steps.
: –: The phase is advanced.
0 +: The phase is delayed.
: <Note>
If setting operation is performed, the setting value does not
550
return to factory (default) setting.
This enables the video system phase to be adjusted in 27ns
–500
: steps.
0 –: The phase is advanced.
: +: The phase is delayed.
500 <Note>
In the case of the HD up-converter output from the SD
playback tape (when the option has been installed), the video
phase is fixed.
–108 This enables the system phase to be adjusted in a total
:
variable range of +/–180 degrees or more.
0 –: The phase is advanced.
:
+: The phase is delayed.
108 <Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
–429 This enables the video out system phase to be adjusted in
: 74ns steps.
0 –: The phase is advanced.
+: The phase is delayed.
:
429 <Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
–429 This enables the SDI OUT system phase to be adjusted in
:
74ns steps.
0 –: The phase is advanced.
:
+: The phase is delayed.
429 <Note>
If setting operation is performed, the setting value does not
return to factory (default) setting.
–190 This enables the video system phase to be adjusted in 148ns
:
steps.
0 –: The phase is advanced.
:
+: The phase is delayed.
<Note>
190
In the case of the SD down-converter output from the HD
playback tape (when the option has been installed), the video
phase is fixed.
0 This enables the SCH phase to be adjusted in 90-degree
90 steps.
–: The phase is advanced.
180
270 +: The phase is delayed.
(The SC phase changes but the H phase remains
unchanged.)
–32 This enables the SCH phase to be adjusted in a total variable
:
range of +/–45 degrees or more.
0 –: The phase is advanced.
:
+: The phase is delayed.
32 (The SC phase changes but the H phase remains
unchanged.)