Waste Disposal - AL-KO bc 250 Manual

Storage
1. Empty fuel tank.
2. Start motor and allow to run empty until it stops.
3. Allow motor to cool.
4. Loosen spark plug with a spark plug socket.
5. Pour a teaspoon of 2-cycle oil into the combustion
chamber. To distribute the oil within the interior of the
motor, pull the starter cord slowly several times.
6. Replace spark plug.
7. Thoroughly clean device and service.
8. Store device in a cool, dry place.
Caution!
Do not store device near open flames or heating sources
- Burn and/or explosion danger!
22
Recommissioning
1. Remove spark plug.
2. Quickly pull starter cord, in order to remove remaining
oil from the combustion chamber.
3. Clean spark plug, examine electrode condition,
replace as necessary.
4. Prepare device for use.
5. Fill up tank with the correct fuel-oil mixture (50: 1).

Waste disposal

Do not dispose worn-out
equipment with household
waste!
Packaging, equipment and accessories are
manufactured from recyclable materials and may be
disposed of accordingly.
Translation of original user instructions