Parts Overview - AL-KO bc 250 Manual

Hide thumbs Also See for bc 250:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16
Assembly

Parts Overview

(Illustration 1)
1
String Head
2
Cutting String
3
Stone impact - protective shield
4
Shaft Tube
5
Connection coupling
6
Hand Grip
7
Ignition Switch
8
Accelerator Lever
9
Safety locking lever
10
Choke
11
Air filter cover
12
Starter grip
13
Exhaust cover
14
Starter string housing
15
Fuel tank
16
Fuel pump (primer)
17
Screw-button key
18
Assembly material - protective shield
Caution!
The device many only be operated after completed
assembly.
Mount hand grip
(Illustration 2)
1.
Loosen set screw (A) and turn the grip upward.
Position the grip to correspond to the arrow direction
sticker.
2.
Securely affix the set screw.
Mount protective shield
1.
Place protective shield (A) using heavy pressure on
the shaft retainer. The protective shield must snap
securely onto the gripping pole.
2.
Lay the washer (C) on the screw.
3.
Securely fasten bolt (D) and nut (E).
18
(Illustration 3 A, B)
Install shank
(Illustration 4 A, B)
1.
Loosen star-screw (E).
2.
Remove cap from shank tube (D) and press shank
exactly into the quick-release connecting piece (A).
Release button (C) must latch into hole (B).
3.
Securely tighten star-screw (E) again.
Fuel and Equipment
Safety Guidelines
Warning!
Gasoline is intensely flammable - burn danger!
Only mix and store gasoline in the containers provided
for the purpose.
Do not use fuel mixture that has been stored for longer
than 90 days
Only tank up outdoors
Do not smoke near the tanks
Do not open the tank closure near running or hot
motors
Replace damaged tank or tank closure
Always close the tank cover securely whenever gasoline
is drained.
Do not start motor:
Avoiding spark attempts
Clean equipment
Producing the fuel mixture
Only use fuel in the ratio of 50:1.
1.
Pour gasoline and 2-cycle brand-name oil into an
appropriate container in accordance with the table
2.
Mix both parts thoroughly.
Table for fuel mixing ratios
Mixing procedure
50 parts gasoline:
1 part mixed oil
2-cycle mixed oil
Translation of original user instructions
Gasoline
Mixed oil
3 l
60 ml
4 l
80 ml
5 l
100 ml

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents