TP-Link TL-MR3420 User Manual page 95

 IPv6 Address - Enter the IPv6 address in dotted-decimal notation provided by your ISP.
 Default Gateway - Enter the default gateway in dotted-decimal notation provided by your
ISP.
 MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely
required, and should not be done unless you are sure it is necessary for your ISP
connection.
 Primary DNS - Enter the DNS IPv6 address in dotted-decimal notation provided by your
ISP.
 Secondary DNS - Enter another DNS IPv6 address in dotted-decimal notation provided by
your ISP.
 IPv6 Address Assign Type - There are two types of assignation for IPv6 address: SLAAC
(Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol
for IPv6) Server.
SLAAC
IPv6 Address Prefix -The Prefix of IPv6 Address
•
DHCPv6 Server
IPv6 Address Prefix -The Prefix of IPv6 Address
•
Release Time - the length of time a network user will be allowed to keep connecting to
•
the router with the current DHCPv6 Address. Enter the amount of time (in seconds)
TL-MR3420
Figure 5-82 Static IPv6 – DHCPv6 Server
3G/4G Wireless N Router User Guide
-84-