Transportation, e.g. if moving house
Preparatory work
1.
2.
3.
4.
5.
Installing transportation protection devices
Installing transportation protection devices
Installing transportation protection devices
1.
2.
Before switching on the appliance:
²
– Remove the transportation protection devices! ~ Page 46
– To prevent unused detergent from flowing into the outlet
54
Turn off the tap.
Release the water pressure in the supply hose. Maintenance
– Filter in the water inlet hose ~ Page 35
Drain any residual detergent solution. Maintenance – Drain
pump blocked
Isolate the washing machine from the power supply.
Remove the hoses.
Remove covers and keep in a safe place.
Remove covers and keep in a safe place.
Remove covers and keep in a safe place.
If required, use a screwdriver.
If required, use a screwdriver.
If required, use a screwdriver.
Insert all 4 sleeves.
Insert all 4 sleeves.
Insert all 4 sleeves.
Clamp mains cable on the holders. Insert and tighten the
Clamp mains cable on the holders. Insert and tighten the
Clamp mains cable on the holders. Insert and tighten the
bolts.
bolts.
bolts.
during the next wash: Pour 1 litre of water into dispenser II
and start the Drain programme.