Ø Programme Settings - Siemens WM16Y590GB Instruction Manual And Installation Instructions

Programme settings
Depending on the programme, you can use the programme
settings to adjust the washing process even more efficiently
to your items of washing.
Programme settings:
²
– are active without acknowledgement.
– not retained after appliance is switched off.
– can be selected or deselected or changed depending
Buttons
–Temperature +
– Spin +
– Finish in +
Finish in +
ecoPerfect
speedPerfect
Less Ironing
26
on the programme progress.
Notes
Before and during the programme the presettings Before and during the programme the presettings Before and during the programme the presettings
can be changed depending on the programme can be changed depending on the programme can be changed depending on the programme
progress.
Maximum spin speed depends on the programme Maximum spin speed depends on the programme Maximum spin speed depends on the programme
and model.
Delays the Finished in time (end of programme). Delays the Finished in time (end of programme). Delays the Finished in time (end of programme).
Before the programme starts, the end of the Before the programme starts, the end of the Before the programme starts, the end of the
programme can be preselected in h steps programme can be preselected in h steps programme can be preselected in h steps
up to maximum 24h. up to maximum 24h. up to maximum 24h.
When the programme has started, the preselected When the programme has started, the preselected When the programme has started, the preselected
time is displayed e.g. for 8h and counts down until time is displayed e.g. for 8h and counts down until time is displayed e.g. for 8h and counts down until
the wash programme starts. Then the programme the wash programme starts. Then the programme the wash programme starts. Then the programme
duration is displayed, e.g. 2:30h.
When the programme has started, the preselected
time can be changed as follows:
1. Select Start/Reload
2. Select Finish in button and change Finish in time.
3. Select Start/Reload
To activate/deactivate the childlock
¦
For saving energy.
G
For a shorter wash time.
{
Reduces creasing by special spin sequence followed
²
by fluffing and reduced spin speed.
. Residual moisture of the washing is slightly
increased.
Ü
.
Ü
.