Connecting The Water - Siemens WM16Y590GB Instruction Manual And Installation Instructions

Connecting the water

ã
Warning!
Danger of death from electric shock!
Danger of death if live parts are touched.
Do not immerse Aqua-Stop safety device in water
(contains an electric valve).
²
– To prevent leakage or water damage, follow the instructions
– Operate the washing machine with cold drinking water only.
– Do not connect to the mixer tap of an unpressurised hot-
– Use only the supplied inlet hose or one purchased from an – Use only the supplied inlet hose or one purchased from an – Use only the supplied inlet hose or one purchased from an
– If in doubt, have the appliance connected by a technician. – If in doubt, have the appliance connected by a technician. – If in doubt, have the appliance connected by a technician.
Water inlet hose
²
Water inlet hose: do not kink, crush, modify or sever (strength is Water inlet hose: do not kink, crush, modify or sever (strength is Water inlet hose: do not kink, crush, modify or sever (strength is
no longer guaranteed). no longer guaranteed). no longer guaranteed).
Optimum water pressure in the mains: 100–1000 kPa Optimum water pressure in the mains: 100–1000 kPa Optimum water pressure in the mains: 100–1000 kPa
Ø
(1–10 bar)
Ø
1.
ã
Warning! Warning! Warning!
Threads for screw connections may be damaged! Threads for screw connections may be damaged! Threads for screw connections may be damaged!
If the screw connections are tightened too tightly using If the screw connections are tightened too tightly using If the screw connections are tightened too tightly using
a tool (pliers), the threads may be damaged.
Tighten plastic screw-fittings by hand only.
PD[
 ƒ
PLQ PP
Aqua-Stop and Aqua-Secure Standard
48
in this chapter!
water apparatus.
authorised specialist outlet, not a used one! authorised specialist outlet, not a used one! authorised specialist outlet, not a used one!
When the tap is turned on, the water flow is at leas When the tap is turned on, the water flow is at leas When the tap is turned on, the water flow is at least 8 l/min.
If the water pressure is higher, install a pressure reducing If the water pressure is higher, install a pressure r If the water pressure is higher, install a pressure r
valve.
Connect the water supply hose. Connect the water supply hose. Connect the water supply hose.
to the tap (¾" = 26.4 mm):
PD[
 ƒ