Information On The Display Panel - Siemens WM16Y590GB Instruction Manual And Installation Instructions

Information on the display panel

Display
CLOSE
DOOR
LOW WATER
PRESSURE
OPEN TAP
PUMP IS
BLOCKED
CLEAN PUMP
DOOR IS
LOCKED
LOCKING ...
UNLOCKING ...
´ ÌÍ
:
´
ERROR : XXX
Cause/Remedy
– Washing may be caught. Please open and close washing
machine door again and select Start/Reload
– If required, shut washing machine door or remove washing and
shut again.
– If required, switch appliance off and on again; set programme
and make individual settings; start programme.
– Turn on tap fully.
– Supply hose kinked/jammed.
– Water pressure too low. Clean the filter. ~ Page 35
– Water pressure too low. Clean the filter. – Water pressure too low. Clean the filter.
– Drain pump blocked. Clean the drain pump. – Drain pump blocked. Clean the drain pump. – Drain pump blocked. Clean the drain pump.
– The water drainage pipe/drain hose is blocked. Clean the – The water drainage pipe/drain hose is blocked. Clean the – The water drainage pipe/drain hose is blocked. Clean the
drainage hose on the siphon. ~ Page 34
Water level or temperature is too high. Water level or temperature is too high. Water level or temperature is too high.
Select Start/Reload
Ü
If the Start/Reload
(e.g. repeatedly reloading items of washing), the door lock may (e.g. repeatedly reloading items of washing), the door lock may (e.g. repeatedly reloading items of washing), the door lock may
overheat. Wait for the door lock to lock or unlock. overheat. Wait for the door lock to lock or unlock. overheat. Wait for the door lock to lock or unlock.
not applicable without AquaStop not applicable without AquaStop not applicable without AquaStop
Water in the base pan, appliance leaking. Water in the base pan, appliance leaking. Water in the base pan, appliance leaking.
Call customer service! ~ Page 40
Call customer service! Call customer service!
Switch off appliance, wait 5 seconds and switch on again. If the Switch off appliance, wait 5 seconds and switch on again. If the Switch off appliance, wait 5 seconds and switch on again. If the
display is indicated again, call customer service. ~ Page 40
display is indicated again, call customer service. display is indicated again, call customer service.
~ ~
Page 34 Page 34
Ü
to continue the programme. to continue the programme. to continue the programme.
button is pressed too frequently button is pressed too frequently button is pressed too frequently
Ü
.
~ ~
37