Ø Faults, What To Do - Siemens WM16Y590GB Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Faults, what to do?
Faults
Water is running out.
Water not flowing in.
Detergent not
washed in.
Washing-machine
door cannot be
opened.
Programme does
not start.
Detergent solution is
not drained.
Water not visible in
the drum.
Spin result not satis-
factory.
Washing wet/too
damp.
Spin cycle actuated
several times.
Residual water in the
Residual water in the
Residual water in the
dispenser for care
product.
Odour formation in
the washing ma-
chine.
Loud noise forma-
tion, vibrations and
"wandering" during
spin cycle.
38
Cause/Remedy
– Correctly attach/replace drainage hose.
– Tighten screw-fitting on the supply hose.
Ü
– Start/Reload
– Tap not open?
– Filter blocked? Clean the filter. ~ Page 35
– Supply hose kinked or jammed?
– Safety function active. Stop programme?
$
– Rinse Hold
(without final spin) selected?
– Can be opened via emergency release only? ~ Page 36
– Can be opened via emergency release only?
– Can be opened via emergency release only?
Ü
– Start/Reload
– Door closed?
– Childlock active? Deactivate.
– Childlock active? Deactivate.
– Childlock active? Deactivate.
$
– Rinse Hold
(without final spin) selected?
(without final spin) selected?
(without final spin) selected?
– Clean the drain pump.
– Clean the drain pump.
– Clean the drain pump.
– Clean outlet pipe and/or drainage hose.
– Clean outlet pipe and/or drainage hose.
– Clean outlet pipe and/or drainage hose.
Not a fault – water below the visible area.
Not a fault – water below the visible area.
Not a fault – water below the visible area.
– Not a fault – unbalanced load detection system has stopped the
– Not a fault – unbalanced load detection system has stopped the
– Not a fault – unbalanced load detection system has stopped the
spin cycle, washing unevenly distributed.
spin cycle, washing unevenly distributed.
spin cycle, washing unevenly distributed.
Distribute small and large items of washing in the drum.
Distribute small and large items of washing in the drum.
Distribute small and large items of washing in the drum.
æ
– Less Ironing
Less Ironing
Less Ironing
– Too low speed selected? ~ Page 22
– Too low speed selected?
– Too low speed selected?
Not a fault – unbalanced load detection system adjusts imbalance.
Not a fault – unbalanced load detection system adjusts imbalance.
Not a fault – unbalanced load detection system adjusts imbalance.
– Not a fault – effect of the care product not impaired.
– Not a fault – effect of the care product not impaired.
– Not a fault – effect of the care product not impaired.
– If required, clean insert. ~ Page 33
Run Cotton 90 °C programme without washing.
Use standard detergent.
– Appliance aligned?
Align the appliance. ~ Page 51
– Appliance feet fixed?
Secure appliance feet. ~ Page 51
– Transportation safety devices removed?
Remove transportation protection devices. ~ Page 46
not selected?
or Finish in time selected?
time selected?
time selected?
selected?

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm14y590gb

Table of Contents