End Of The Programme - Siemens WM16Y590GB Instruction Manual And Installation Instructions

Ø

End of the programme

FINISHED is indicated on the display panel. FINISHED is indicated on the display panel. FINISHED is indicated on the display panel.
If the symbol
the washing machine has detected too much foam during the the washing machine has detected too much foam during the the washing machine has detected too much foam during the
wash programme and therefore automatically activates additional wash programme and therefore automatically activates additional wash programme and therefore automatically activates additional
rinse cycles to eliminate the foam. rinse cycles to eliminate the foam. rinse cycles to eliminate the foam.
²
Dose less detergent in the next wash cycle with the same load. Dose less detergent in the next wash cycle with the same load. Dose less detergent in the next wash cycle with the same load.
20
End of programme by Rinse Hold. Programme stops
in the last rinse cycle.
– Select Start/Reload
the drain and spin cycles (if required change spin speed).
– If only the drain cycle, but not the spin cycle, is required,
select and start the Empty programme.
Å
is also indicated on the display panel, is also indicated on the display panel, is also indicated on the display panel,
Ü
. The programme continues with