After Washing - Siemens WM16Y590GB Instruction Manual And Installation Instructions

After washing

Open washing machine door and remove washing.
1.
²
– Do not leave any items of washing in the drum. In the next
wash they may shrink or discolour something else.
– Remove any foreign objects from the drum and the rubber – Remove any foreign objects from the drum and the rubber – Remove any foreign objects from the drum and the rubber
seal – risk of rust.
– Leave detergent drawer and door open so that residual water – Leave detergent drawer and door open so that residual water – Leave detergent drawer and door open so that residual water
can evaporate.
Before switching the machine off: Before switching the machine off: Before switching the machine off:
²
– Always remove the washing. Otherwise, the load display may – Always remove the washing. Otherwise, the load display may – Always remove the washing. Otherwise, the load display may
malfunction.
– Always wait until the programme ends, as the appliance – Always wait until the programme ends, as the appliance – Always wait until the programme ends, as the appliance
could still be locked. Then switch the appliance on and wait could still be locked. Then switch the appliance on and wait could still be locked. Then switch the appliance on and wait
for the unlocking device. for the unlocking device. for the unlocking device.
Press the Press the Press the
2.
Turn off the tap.
3.
Not required for Aqua-Stop models. ~ Page 60
# # #
button. Appliance is switched off. button. Appliance is switched off. button. Appliance is switched off.
21