Chapter 5 - Appliances; Stove; Handling Stove Assembly - Jayco Eagle Owner's Manual

NOTE: Separate owner's manuals are supplied from manufacturers of the appliances to
assist you in the operation of individual appliances. Read all manuals completely before
operating any appliance.
It is important to remember that the folding camping trailer appliances are connected to
the LP gas system. All safety precautions and warnings stated in Chapter 4 for the LP gas
system need to be observed when using the appliances.

STOVE

Your folding camping trailer is equipped with a
removable or portable stove containing two or
three burners for cooking purposes. This por-
table assembly may be used inside or outside of
the camper. Please refer to the manufacturer's
owner's manual for complete operating and care
instructions.

Handling Stove Assembly

1. Always carry cabinet assembly with both hands.
2. Mount cabinet onto rail at a
horizontal position.
3. If applicable, attach brace to underside of stove and unit.
4. LP gas connections are made with a "Quick-Coupler" system (Fig. 5-2) with
positive shut-off valve as required by code and standards.
5. Each stove assembly will have a hinged wind guard attached. Raise hinged assembly
to vertical position. End panels are also hinged and will swing to outer edge of stove
for wind protection, preventing flames from reaching tent material.
CHAPTER 5
APPLIANCES
30° angle and slowly lower outer side until in
Fig. 5-2
4 4
Fig. 5-1