Canopy Installation And Setup - Jayco Eagle Owner's Manual

Parts List for Front Beds Eagle Folding Camping Trailers

CANOPY INSTALLATION AND SETUP

Before installing canopy, note these two observations for correct installation.
1. Three or more brass grommets are installed in the vinyl bag for breathing purposes.
Grommets must be on the lower side.
2. Zipper tab in closed position will be in
the rear of the camper.
Install
1. Slide the hard round plastic extrusion
into rail mounted to roof.
2. Position the front end of the canopy even
with the rail at the front end.
3. Drill 1/8" hole, 2" from front of unit,
through aluminum rail and plastic extru-
sion.
4. Insert one screw (8x1/2" P/H, pan-head,
Part #0051594) through the hole to hold
the canopy in position.
Setup – Folding Camping Trailer Self Storing Canopy
Your canopy has been designed and built with quality material to give you years of
trouble free service with low maintenance.
Read these instructions fully before beginning setup. Become familiar with each pole, its
description and where it belongs. Refer to Fig. 3-8
One person can do the setup, but two people will make it easier.
1. Open zipper and unroll canopy fabric.
2 2