Moving The Printer - Kyocera FS-9120DN Installation Manual

Prolonged Non-Use and Moving the Printer
Prolonged Non-use
If you ever leave the printer unused for a long period of time, remove the power cord from the wall outlet.
We recommend you consult with your dealer about the additional actions you should take to avoid possible dam-
ages that may occur when the printer is used next time.

Moving the Printer

When you move the printer:
• Pull out the four handles at the left and right
sides of the printer.
• Move it gently.
• Keep it as level as possible, to avoid spilling toner
inside the printer as shown in the figure.
• If you ship the printer, remove the developer unit
and ship it separately. Be sure to consult your
Kyocera Mita dealer before attempting long-dis-
tance transportation of the printer.
E S
®
NERGY TAR
As an E S Partner, we have determined that this product meets the E
NERGY TAR
S guidelines for energy efficiency.
TAR
The basic objective of the E
by encouraging the manufacture and sale of equipment that uses energy more effi-
ciently.
This printer is equipped with a sleep timer function that conforms with the standards
of the E S Program. This function makes it possible to reduce the amount of
NERGY TAR
electrical power consumed by the printer. For maximum power savings, turn off the
printer's power supply when not using the printer for extended periods of time.
For details on the sleep timer function and printer power consumption, refer to the
CD-ROM Operation Guide provided with the printer.
Initial settings of the sleep timer function and power saved using the sleep timer func-
tion:
Model name Initial sleep mode setting
FS-9120DN 15 minutes (60 minutes)
FS-9520DN 15 minutes (60 minutes)
Left handles
S Program is to reduce environmental pollution
NERGY TAR
Power consumption in sleep mode
12 W (40 W)
12 W (75 W)
( ): E
Right handles
S program guideline
NERGY TAR
NERGY
27