Kyocera FS-9120DN Installation Manual page 15

4
Slide the paper into the paper cassette.
•Do not load more paper than will
fit under the load limit on the
rear side paper guide.
•The paper cassette will hold
approximately 500 sheets of
paper with a 80 g/m² (21 lb.) basis
weight, or with a thickness of
0.11 mm.
•The image will be printed on the
side facing up.
5
Insert the paper size indicator (included)
into the slot in the paper cassette. This
size of the paper loaded is identified.
6
Close the paper cassette.
7
Load the paper into the second paper cas-
sette in the same way.
8
Set media type for the cassette according
to the paper in the cassette.
By setting media type, the printer can
automatically feed paper according to
the media type assigned in the applica-
tion software (printer driver). To set
media type, refer to the
in the CD-ROM.
Operation Guide
UPPER LEVEL
13