Pioneer DVR-645H-S Operating Instructions Manual page 72

DVR645H_WY_EN.book 72 ページ ２００６年７月５日 水曜日 午前１０時２５分
07
Playback
PLAY
3 Start playback.
• If you're playing a DVD-Video or Video
CD, a disc menu may appear when you
start playback. Use the
buttons and ENTER to navigate DVD disc
menus, and the number buttons and
ENTER for Video CD menus.
• When playing video from the HDD,
playback will automatically stop after the
end of a title is reached.
• There may be a slight pause when
playback switches from the first to the
second layer of a dual-layer disc.
• See the following sections for more
details on playing specific kinds of discs.
STOP
4 Press to stop playback.
5 When you've finished using the
recorder, eject the disc and switch the
recorder back into standby.
72
En
Playing DVD discs
The table below shows the basic playback
controls for DVD-Video, and recordable DVD
discs.
Press to start playback.
PLAY
If RESUME is displayed on-
screen, playback starts from
the place last stopped.
Press to stop playback.
STOP
You can resume playback from
the same point by pressing
PLAY . (Press
to cancel the resume function.)
Pauses playback, or restarts
PAUSE
playback when paused.
Press to start scanning. Press
repeatedly to increase the scan-
ning speed.
Press to skip to previous/next
PREV NEXT
chapter/title. (During playback
you can also use the front panel
CH +/– buttons.)
DVD+R/DVD+RW only:
PREV may not always skip
to the previous title.
Except VR mode: During play-
REC MODE
back, enter a chapter number
AUDIO SUBTITLE ANGLE
then press ENTER to skip
PLAY MODE
directly to that chapter within
CLEAR
the currently playing title.
On some discs, you can also
use the number buttons to
ENTER
select numbered items in the
disc menu.
VR mode only: During playback,
enter a title number then press
ENTER .
All: Press CLEAR to clear a
number entry and start again.
STOP again