Pioneer DVR-645H-S Operating Instructions Manual page 65

DVR645H_WY_EN.book 65 ページ ２００６年７月５日 水曜日 午前１０時２５分
Recording
6 Set the start time.
ENTER
The start date and time is displayed in the
middle of the screen.
• You can go back and reset the start time
if you need to by pressing RETURN .
7 Move the cursor to the
recording end time on the grid.
Recording start time
Easy Timer Recording
11:00 12:00 13:00
1/01
2/01
3/01
1/01 11:45
SAT
Pr 7
REC MODE
As you move the cursor around the grid, an
arrow stretches from the start time to the
current cursor position, representing the
length of the recording. A recording of up to
six hours can be set.
8 Set the end time.
ENTER
9 Select 'Yes' to set the timer
recording and exit, or 'No' to go back to
the Easy Timer Recording screen.
• You can check the timer recording
details you just set from the Schedule
Area in the GUIDE Plus+ system; see
The Schedule Area on page 46.
Recording end time
14:00 15:00 16:00 17:00
– 13:45
SP HDD/DVD HDD
Extending a timer recording in
progress
You can extend a timer recording beyond the
programmed end time. This can be useful if
a broadcast program overruns, for example.
Canceling or extending the timer
REC
1 Press and hold for three seconds
during a timer recording.
Recording continues, but the timer indicator
disappears from the front panel display
indicating that the timer has been canceled.
REC
2 Press repeatedly to extend
recording in 30 minute blocks.
Stopping a timer recording
STOP REC
1 Press during a timer recording.
ENTER
2 Select 'Yes' to confirm.
Preventing use of the recorder
before a timer recording (child
lock)
You can make all the front panel and remote
control buttons inoperative using the child
lock feature. This is useful when you set a
timer recording and want to make sure that
the timer settings are not changed before
recording has finished.
06
65
En