Nikon F6 Instruction Manual page 97

b1: EV step
At the default setting, shutter speed and aperture are indicated in 1/3 EV
steps. However, this can be changed to 1/2 or 1 EV steps.
b2: Exp. comp. EV
At the default setting, exposure compensation is set in 1/3 EV steps.
However, this can be changed to 1/2 or 1 EV steps.
b3: Exposure comp.
Exposure compensation is set using the Main-Command Dial and the
button by default. However, it can be set to be selected using only the Sub-
Command Dial in Programmed Auto and Shutter-Priority Auto, or using only
the Main-Command Dial in Aperture-Priority Auto exposure mode.
• If "CMD Dial only" is selected in Manual exposure mode, electronic analog displays
in the top LCD panel and viewfinder appear and "0" of the display blinks. In
Manual exposure mode, exposure compensation cannot be selected only with the
Command Dial even if "CMD Dial only" is selected.
• If "Change Main/Sub" is selected in "f4: Command dials" (
of the Main- and Sub-Command Dials switch (except in Programmed Auto
exposure mode).
Options:
1/3 step: Indicated/selected in 1/3 EV steps
1/2 step: Indicated/selected in 1/2 EV steps
1 step: Indicated/selected in 1 EV steps
Options:
1/3 step: Selected in 1/3 EV steps
1/2 step: Selected in 1/2 EV steps
1 step: Selected in 1 EV steps
Options:
[+/–] & CMD Dial: Exposure compensation selected with
Command Dial while pressing the
CMD Dial only: Exposure compensation selected only with
Command Dial
64, 66, 68, 70
74
74
button
109), the operation
97