Nikon F6 Instruction Manual page 102

Custom Setting Menu
d4: Last frame
At the default setting, film starts to rewind automatically at the end of film
roll. However, this can be changed to start after frame 36 or 35. (Useful in
saving the film negative in 6 strips of 6-frame or 7 strips of 5-frame.)
• Film advance stops at frame 36 or 35 when "d2; film rewind" (
"Manual".
d5: MB-40 CH fps
With the Multi Power Battery Pack MB-40 (optional) attached, the maximum
film advance speed in C
be changed to 7 fps or 6 fps.
d6: DX warning
When film sensitivity is set to
warning appears when film is advanced to the first frame. However this can
be changed so the warning appears when the power is turned on and
camera back is closed (without advancing the film to the first frame).
102
Options:
End of film: Film starts to rewind at the end of film roll
Frame 36: Film starts to rewind after frame 36
Frame 35: Film starts to rewind after frame 35
(continuous high-speed) is 8 fps. However, this can
H
Options:
8 fps: Maximum film advance speed of 8 fps
7 fps: Maximum film advance speed of 7 fps
6 fps: Maximum film advance speed of 6 fps
and non-DX-coded film is loaded, a
Options:
After film load: Non-DX film warning when film is
advanced to the first frame
Always visible: Non-DX film warning when the power is
turned on and camera back is closed (without advancing
the film to the first frame)
—continued
32
101) is set to
45, 166
23