Nikon F6 Instruction Manual page 146

Non-CPU Lens
Selecting lens number with button and dial operation
Lens number (combination of focal length and maximum aperture)
set at the "Specifying lens data" can be selected using the FUNC
button and Main-Command Dial (without menu operation).
1
Set "FV Lock" and "Lens data" in the "f3 FUNC. Button" (
• Select "FV Lock" and "Lens data" in the "f3FUNC. Button referring to
"Operation in Menu" on page 88.
• "Lens data" cannot be selected alone; "FV Lock" is also selected.
2
Press the FUNC. button and rotate the Main-Command Dial to select
lens number (0-9).
• The lens data display appears when the FUNC. button is pressed. Check the
focal length and maximum aperture and select your desired lens number.
• With lens number 1, the selected lens number is displayed as "L-1" in the rear
LCD panel. No number is displayed when a CPU lens is attached and when
either focal length or maximum aperture is not specified with non-CPU lens.
• If an SB-800 or 600 Speedlight is mounted on the camera, turn the Speedlight
off before pressing the FUNC. button (since the FV Lock [
over the Lens data).
146
—continued
108).
151] has priority