Nikon F6 Instruction Manual page 94

Custom Setting Menu
a1: AF-C priority
The default setting for Continuous Servo AF is release priority. However, film
advance speed can be set to decrease as much as possible to ensure a
correct focus. (Useful in situations such as using focus tracking under dark
conditions.) Also, it can be changed to focus priority, in which the shutter can
be released only when the subject is in focus
a2: AF-S priority
The default setting for Single Servo AF is focus priority. However, it can be
changed to release priority.
a3: Group dynamic AF
The pattern of the groups in Group Dynamic AF Mode can be changed.
94
Options:
Release + fps: Shutter is released when the shutter release
button is pressed
Release + focus: Shutter is released when the shutter release
button is pressed but film advance rate drops to ensure
a correct focus
Focus priority: Shutter cannot be released unless subject is
in-focus
Options:
Focus priority: Shutter cannot be released unless subject is
in-focus
Release priority: Shutter is released when the shutter release
button is pressed
Options:
Pattern 1 Center: Center-Subject Priority in Pattern 1
Pattern 1 Closest: Closest-Subject Priority in Pattern 1
Pattern 2 Center: Center-Subject Priority in Pattern 2
Pattern 2 Closest: Closest-Subject Priority in Pattern 2
• For the pattern of the groups of focus areas in Group
Dynamic AF Mode, see page 53.
—continued
48
48
52