Nikon F6 Instruction Manual page 105

e3: AA flash mode
When non-TTL Auto flash mode is used with the SB-80DX or SB-28DX, Auto
Aperture flash is not performed. However, this can be changed.
• With the SB-800, setting on the Speedlight overrides the setting in "e3: AA flash
mode".
e4: Modeling flash
On the SB-800/SB-600, the modeling flash fires when the depth-of-field
preview button on the camera is pressed. However, this can be changed.
e5: Auto BKT set
At the default setting, both Auto Exposure Bracketing and Flash Exposure
Bracketing are active. However, this can be changed so that only Auto
Exposure Bracketing or Flash Exposure Bracketing is active.
Options:
Off: Non-TTL Auto flash without Auto Aperture flash (Set
aperture on the Speedlight)
On: Non-TTL Auto flash with Auto Aperture flash
Options:
On: Modeling flash fired and depth-of-field preview
Off: Depth-of-field preview only
Options:
AE & flash: Auto Exposure Bracketing and Flash Exposure
Bracketing are active
AE only: Only Auto Exposure Bracketing is active
Flash only: Only Flash Exposure Bracketing is active
155
151
75
105