Selecting Focus Area - Nikon F6 Instruction Manual

Autofocus

Selecting focus area

The F6's 11 focus areas cover a broad range, and you can select
among them depending on the subject's position in the frame or
your desired composition. They provide a sharp, reliable focus
without requiring that you use focus lock (
Display in single area AF mode
50
—continued
1
Set the AF Area mode selector to a position
other than
• When
and focus area cannot be selected.
2
Rotate the multi-selector lock release to
release the lock and press the multi-selector
to select a focus area.
• Select a single focus area in Single Area AF or
Dynamic AF modes, or a group of focus areas
in Group Dynamic AF Mode.
• To change the focus area(s), lightly press the
shutter release button and press the multi-
selector up/down/right/left in the appropriate
direction. (To select the center focus area[s],
press the center of the multi-selector.)
• Selected focus area(s) appear(s) momentarily in
red in the viewfinder.
• Selected focus area(s) is/are also indicated in
the rear LCD panel (in normal and detailed
display).
58).
.
is selected, multi-selector is locked