System board
To remove the system board:
1.
Prepare the computer for disassembly (see
2.
Remove the bezel (see
3.
Remove the display panel (see
4.
Remove the WLAN module (see
5.
Remove the USB receiver (see
6.
Disconnect the following cables from the system board, noting their location for reinstallation:
(1): Webcam/microphone connector board cable
(2): Fan cable
(3): Hard drive cable
(4): Speaker (tweeter) cable
(5): Speaker (subwoofer) cable
(6): Audio board cable
(7): OSD board cable
7.
Remove the nine Phillips screws that secure the system board to the computer.
Preparing to disassemble the computer on page
Bezel on page
23).
Display panel on page
WLAN module on page
USB wireless receiver on page
26).
28).
22).
17).
System board
43